Home > Products And Services > Electromagnetic Units

Electromagnetic Units

Electromagnetically actuated clutches and brakes, clutch/brake combined units and tooth clutches

Thanks to the many design variations, Ortlinghaus electromagnetic clutches and brakes can be used in many different applications. The electromagnet with its built in coil is an actuation unit that is totally free of wear. The operating voltage, normally 24V DC, can usually be made available and introduced into the clutch or brake without any problem.

The engagement, or disengagement, can be adjusted and controlled electrically. The areas of application of this product group are indicated with the aid of a number of examples. You will find further details in the sections describing the individual products.

Multi-plate electric clutches and brakes (1, 2, 3, 4, 5) are used in the main and secondary drives of machine tools, speed change gearboxes and in general mechanical engineering.

Single face electric clutches and brakes, combined units (6, 7, 8, 9, 10) are used in secondary drives, for example, on the front power take off shafts of agricultural tractors. In addition they are frequently used in packing, textile machines, and on conveyor belts. The product range gives the development engineer the freedom to tackle an almost unlimited range of applications.

Eletric Tooth clutches (11, 12) are the preferred clutch for printing machines; in addition they are used in, for example, turnstiles at public entrances and on drives for gates.

Spring-applied multi-plate brakes (13, 14) are used as safety brakes on, for example, cranes, winches and other lifting devices.

Spring-applied twin face brakes (15, 16) are used primarily for flanging directly onto electric motors.

Stationary field Sinus® multi-plate clutches for wet-running with flux through the plates design

1 Series 0-010 Electric Clutch

This is a powerful electric clutch requiring no maintenance for a wide spectrum of applications in mechanical engineering.

Friction combination: Wet-running steel plates which show little wear when properly cooled; no adjustment of the air gap required.

Power feed: Without slipring via cable and flat plug

Slipring Sinus® multi-plate clutches for wet-running with flux through the plates design

Back to Top - Ortlinghaus Electric Clutch

2/3 Series 0-011-05. and 0-011-100 Electric Clutch

A compact, maintenance free clutch for mechanical engineering applications providing high performance with small dimensions. Available in both hub and housing versions, allowing application flexibility.

Friction combination: Wet-running steel plates which show little wear when properly cooled; no adjustment of the air gap required.

Power feed: Via slipring and brushes.

Sinus® multi-plate brakes for wet-running with flux through the plates design

Back to Top - Ortlinghaus Electric Clutch

4 Series 0-011-300 Electric Clutch and Brake

Maintenance free, compact machine and transmission brake providing high performance with small dimensions.

Friction combination: Wet-running steel plates which show little wear when properly cooled; no adjustment of the air gap required.

Power feed: Via cables to terminals on the magnet body.

Slipring Sinus® multi-plate clutches for wet- or dry-running with adjustable air gap.

Back to Top - Ortlinghaus Electric Clutch & Brake

5 Series 0-006 Electromagnetic Brakes & Clutches

Friction combination: Steel/sinter for wet-running steel/sinter and steel/organic friction lining for dry-running. The magnetic flux does not flow through the plate stack, therefore there is no restriction on the friction combination that can be used.

Power feed: Via sliprings and brushes.

Single face electromagnetic clutches and brakes for dryrunning

Back to Top - Ortlinghaus Electromagnetic Clutches & Brakes

6/7/8 Series 0-008-10./-30. and 0-009 Electromagnetic Brakes & Clutches

Magnetically actuated, rapid switching dry-running clutches and electromagnetic brakes for machines and many other devices. Both the clutches and the brakes permit space saving, adaptable to different design situations.

When disengaged, these electromagnetic clutches and brakes are free of residual torque. They can be supplied either with magnet bodies in a mounted version with bearings or flange fixings to the machine frame. In the case of the brakes the magnet body also forms the pole friction surface, giving an especially short overall length. The armature plate can be connected to the relevant rotors in many different ways.

Power feed: Via cables to the non-rotating magnet body.

Single face clutch/brake combined units

Back to Top - Ortlinghaus Electromagnetic Clutches & Brakes

9/10 Series 0-008-102 and 0-081 Electromagnetic Brakes & Clutches

Supplied ready to install, these space saving combined units of electric clutch and brake, series 0-008 and 0-009, offer all the advantages of this type of design. These combined units have proved themselves especially suitable for drives in which the sequence of clutch disengagement/engagement and braking must be carried out continuously, rapidly and precisely. In addition to an open version (0-008-102), a unit in a closed housing is also available (0-081). The latter permits foot mounting and connection via shaft journals.

Power feed: With 0-008-102 via cables to the non rotating magnet body; with 0-081 to a terminal box on the housing.

Tooth clutches with and without slipring for wet- and dry-running

Back to Top - Ortlinghaus Electromagnetic Clutches & Brakes

11/12 Series 0-012 and 0-013 Electromagnetic Brakes & Clutches

Non-slip, compact clutches with teeth for the transmission of high torques in small spaces. This type of electric clutch is the correct choice when static engagement only, is required. Engaging at low speeds can also be carried out subject to particular electrical measures being taken. There is no residual torque when the clutch is disengaged.

Power feed: In the case of 0-012 via slipring and brushes. In the case of 0-013 via cables and rectangular connectors.

Spring-applied multi-plate brake for wet- or dry-running

Back to Top - Ortlinghaus Electromagnetic Clutches & Brakes

13/14 Series 0-028 and 0-228 Electromagnetic Brakes & Clutches

The dry-running version is an electromagnetically released multi-plate brake that can be mounted as required. Special options: Dust cover, closed plate chamber; manual release lever for emergencies; version for wet-running.

Friction combination: Steel/organic friction lining for dry-running or steel/brass for wet-running

Power feed: Either via cables and rectangular connectors (24 V DC) or to a connection box with integrated rectifier (220 V)

Spring-applied twin-face brakes for dry-running

Back to Top - Ortlinghaus Electromagnetic Clutches & Brakes

15/16 Series 0-207 Electromagnetic Brakes & Clutches

This brake is particularly suitable for mounting on electric motors.

In addition to the standard version, a central torque setting facility is available, together with dust protection and manual release lever.

Friction lining: The single plate has organic friction linings on both sides.

Power feed: Via cables to the stationary magnet body.

No. Series Torque range
Nm		 Hub bore
mm		 External diameter
mm
1 0-010 12 to 3000 18 to 98 80 to 310
2 0-011-05. 12 to 3000 15 to 115 80 to 310
3 0-011-100 12 to 3000 12 to 115 80 to 310
4 0-011-300 12 to 1600 20 to 65 80 to 195
5 0-006 12 to 2400 20 to 105 85 to 295
6 0-008-10. 1,7 to 480 8 to 80 45 to 266
7 0-009 1,7 to 480 8 to 80 42 to 250
8 0-008-30. 7,5 to 480 15 to 80 68 to 266
9 0-008-102 7,5 to 480 15 to 80 80 to 290
10 0-081 7,5 to 120 14* to 40 120 to 250
11 0-012 40 to 4000 20 to 98 70 to 240
12 0-013 40 to 1600 20 to 65 80 to 195
13 0-028 7,5 to 600 16 to 80 100 to 250
14 0-228 7,5 to 600 16 to 80 100 to 250
15 0-207-000 4 to 240 8 to 50 83 to 250
16 0-207-104 4 to 240 8 to 50 83 to 250


* Shaft Journal

Back to Top - Ortlinghaus Electromagnetic Clutches & Brakes

17 Accessories for Electromagnetic Brakes & Clutches

A comprehensive range of accessories are available for operating and controlling brakes and clutches. We can supply

  • Connection boxes
  • Rectifiers
  • Plug-in connections/plugs
  • Electronic load relays
  • Power feeds
  • Capacitors
  • Brush holders
  • Varistors

Back to Top - Ortlinghaus Electromagnetic Clutches & Brakes

Application Examples of Electromagnetic Brakes & Clutches

Electromagnetic single-face clutch, series 0-008-100, here in combination with an electromagnetic single-face brake, series 0-009-100.


Stationary field electromagnetic Sinus® multi-plate clutches. Series 0-010, friction combination steel/steel, here in combination with an electromagnetic, spring-applied multi-plate brake, series 0-028, friction combination steel/"Ortex" friction lining, as fitted in winch drives.		 Electromagnetic Sinus® multi-plate clutch with slipring, series 0-011, and electromagnetic Sinus® multi-plate brake, series 0-011-300, as fitted in a straightening and cut-off machine.

Stationary field electromagnetic tooth clutch, series 0-013 with the tooth wheel flanged onto the driving part.

Back to Top - Ortlinghaus Electromagnetic Clutches & Brakes