Home > Spare Parts > IDElectro

Identifying an Ortlinghaus Electromagnetic Unit

  1. Determine if you are working with a clutch, tooth clutch, electrically applied brake, or a spring set brake.
  2. Determine if the unit operates in a dry or oil condition.
  3. Determine if the unit is a single plate or multiple plate.
  4. Determine if the unit uses wires, terminal block, connection block or a single or double slipring.
Model Type Operating Plate Connection
0-008 Clutch Dry Single Wire
0-010 Clutch Wet Multiple Terminal Block
0-006 Clutch Either Multiple Slipring
0-012 Tooth Clutch Either None Slipring
0-013 Tooth Clutch Either None Terminal Block
0-009 Electrically Applied Brake Dry Single Wire
0-207 Spring Set Brake Dry Single Wire
0-028/228 Spring Set Brake Dry Multiple Terminal or Connection Block
0-008/102 Combination Unit Dry Single Wire
0-081 Combination unit in housing Dry Single Connection Block
0-011 Clutch OR Electrically Applied Brake Wet Multiple Clutch Single Slipring
Brake Steel Terminal Block